Filter
Top Products
180
Appendix
The lens-barrel unit
is dirty or looks
scratched.
A lubricating agent is used to ensure that the lens operates
smoothly. When the lens is extended, the lubricating agent can
make it appear as if the lens-barrel unit is scratched. You can
use a soft, dry cloth to wipe the lubricating agent off, if you want.
When wiping off the lens-barrel unit, wipe gently taking care you
do not twist the unit, or push it in, or pull it out. Note that the
lubricating agent is not harmful to humans.
Display Messages
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery is low. Battery power is low.
Camera not in
standby.
Re-frame the image.
The camera could not go into auto record standby for some
reason during a Move Out CS or Move In CS operation.
Compose the image again with the boundary aligned
correctly (page 83).
Cannot find the file.
The image you specified with the slideshow “Images”
setting cannot be found. Change the “Images” setting (page
112) and try again.
Cannot register any
more files.
You are attempting to save a user BEST SHOT scene in
the “SCENE” folder when the folder already contains 999
user scenes.
Card ERROR
There is something wrong with the memory card. Turn off
the camera, remove the memory card and then reload it
into the camera. If this message re-appears when you turn
the camera back on, format the memory card (page 157).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a
computer or some other storage device.
Check connections!
You are attempting to connect the camera to a printer while
the camera’s USB settings are not compatible with the USB
system of the printer (page 124).
Problem Possible Cause and Recommended Action