Filter
Top Products
72
Recording Movies
You can use the following procedure to turn optical zoom (page 50) on or off while
“HD/STD” is selected as the movie mode.
1. Set the mode dial to
³
(HD/STD).
2. Press [8].
3. Use [8] and [2] to select the fourth control panel option from the
bottom (Optical Zoom).
4. Use [4] and [6] to select the setting you want and then press [SET].
NOTE
• Optical zoom operation while recording is disabled when “HS” is selected as the
movie mode.
• Regardless of the above setting, optical zoom operation prior to recording is
supported when either “HS” or “HD/STD” is selected as the movie mode.
• Optical zoom is disabled when Á (Super Macro) is selected as the focus mode.
• The zoom bar is not displayed while movie recording is in progress.
Turning Optical Zoom On or Off (Optical Zoom)
Optical Zoom: On/Record: Off
Enables optical zoom and disables audio recording. Continuous AF is
always performed during recording.
Optical Zoom: Off/Record: On
Disables optical zoom and enables audio recording. Continuous AF is
never performed during recording. You can readjust focus while recording
is in progress by half pressing the shutter button, but doing so will cause
noise produced by the lens operation to be picked up in the audio.
• The Ú (Zoom Disabled) icon is displayed while this setting is selected.