Cisco Systems CTSATPSX204XK9 Security Camera User Manual


 
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com
20
Cisco TelePresence SX20 Quick Set
ADMINISTRATOR GUIDE
Upgradingthesystemsoftware
From the Upgrade Software page you can initiate software
upgrades and add a release key and option keys.
Softwareversions
This video conference system is using TC software.
NOTE: Contact your system administrator if you have
questions about the software version.
Softwarereleasenotesandupgradefiles
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC5).
Go to: http://www.cisco.com/en/US/products/ps11424/
tsd_products_support_series_home.html
Downloadingnewsoftware
For software download, go to: http://www.cisco.com/cisco/
software/navigator.html
Releasekey
The release key is required to be able to use the released
software. A new release key is required for every major
software release (e.g. from TC4.x to TC5.x).
Contact your Cisco representative to obtain the release key.
Optionkeys
Option keys allow for extended functionality of the system.
The keys are required to activate the optional functionality. You
may have several option keys in your system.
The available options are:
• Premium resolution
• MultiSite
• Dual display
Contact your Cisco representative to obtain the option keys.
1.Addthereleaseandoptionkeys
Contact your Cisco representative to obtain the required
key(s). To add a release key and one or more option
keys, complete the following steps:
i. Enter the Release Key and press Add. Key format:
“1TC005-1-0C22E348” (each system has a unique
key).
ii. Enter the Option Key and
press Add. Key format:
“1N000-1-AA7A4A09”
(each system has a unique
key).
iii. If you have more than one
option key, repeat step ii
for all of them.
2.Upgradethesoftwareonthecodec
i. Before you can start the upgrade you must download
the software upgrade file. The file format is
“s52010tc5_1_0.pkg” (each software version has a
unique file name).
ii. Press Browse... and select the .PKG file.
iii. Press Upgrade to start the installation.
iv. Allow the installation process to complete. It may take
up to 30minutes. You can follow the progress on the
web page.
The system reboots automatically after the installation,
and the connection to the web interface is lost.
If you want to continue working with the web interface
you must re-establish the connection and sign in
anew.
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart
Factory Reset
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Web interface