Cisco Systems CTSATPSX204XK9 Security Camera User Manual


 
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com
7
Cisco TelePresence SX20 Quick Set
ADMINISTRATOR GUIDE
Startingthewebinterface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In the following you will find information how to use the web
interface for system configuration and maintenance.
1.Connecttothevideosystem
Open a web browser and enter the
IP address of the video system in the
address bar.
To find the IP address (IPv4 orIPv6), tap
More > Settings > System Information
on a Touch controller; or navigate to
Home > Settings > System information
when using a remote control and the
on-screen menu.
2.Signin
Enter the user name and password for
your video system and press Sign In.
The system is delivered with a default
user named admin with no password
(i.e. leave the Password field blank when
signing in for the first time).
NOTE: We strongly recommend that you
set a password for the admin user to
restrict access to system configuration,
see the next page.
Signout
Click on your user
name and select
Sign out from the
drop down menu.
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Web interface