Filter
Top Products
Installing WebCam Go 1-5
Installing WebCam
Go
1. Position your computer so that its USB ports can be easily accessed.
2. Connect the smaller end of the USB cable to the USB connector at the back of WebCam Go.
3. Connect the other end of the USB cable to an available USB port on your computer.
4. Place WebCam Go on top of your computer monitor or another flat surface.
5. Assemble the microphone and connect it to your audio card’s external microphone
connector.
• The USB port(s) on your
computer may be found on
the front panel instead of the
back panel.
• You can also attach it to a
self-powered USB hub.
• You can choose to connect
WebCam Go to your
computer after you have
switched on your computer.
• Most audio cards have an
external microphone
connector.
• Consult the documentation
for your audio card for more
information concerning the
use of a microphone and, in
particular, how to adjust the
volume.
Figure 1-4: Connecting the WebCam Go (USB model).
USB port
USB connector
USB cable