Filter
Top Products
100
Using the SCART Adapter
Connect the supplied stereo cable to the camcorder’s AUDIO1 terminals and the audio connections on the
SCART adapter. Connect the video connection on the SCART adapter using an RCA video cable
(commercially available) to the camcorder’s VIDEO IN/OUT - RCA Terminal and set the RCA/BNC selector
down to RCA.
If connecting to a TV set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
The supplied PC-A10 SCART Adapter is for output only. For analog line-in recording or analog-digital
conversion, use a commercially available SCART adapter with input capability.
Refer also to the instruction manual of the TV or VCR.
We recommend powering the camcorder from a household power outlet.
When connecting to the RCA terminal, set the RCA/BNC selector down to RCA. When connecting
to the BNC terminal, set the RCA/BNC selector up to BNC.
In fast forward playback, rewind playback and reverse playback of a tape recorded in HDV mode,
the picture may be distorted.
3
AUDIO
(L/MONO)
AUDIO
(R)
VIDEO
Signal flow
PC-A10 SCART
Adapter
Stereo Cable (supplied)
RCA cable
(commercially available)