Filter
Top Products
98
Using the HDV/DV Terminal
• When connecting the camcorder to a monitor TV that supports DV, you may need to carry out a procedure
on the TV to recognize the camera. Refer to the instruction manual of the TV or monitor.
• If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with the
following procedure.
Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a setting
option and close the menu.
Using the S-VIDEO or VIDEO Terminal
If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE.
Refer also to the instruction manual of the TV or VCR.
3
DV Cable
(commercially available)
4-pin
6-pin
4
AUDIO
VIDEO
R
L
S (S1)-VIDEO
INPUT
Stereo Cable (supplied)
Signal flow
Signal flow
Open the terminal cover
S-Video Cable
(commercially available)