Filter
Top Products
14
Preparations
Preparing the Power Supply
Charging the Battery Pack
Disconnect the DC coupler from the power adapter before charging. Remove the terminal cover of the
battery pack.
1. Connect the power cord to the adapter.
2. Plug the power cord into a power outlet.
3. Attach the battery pack to the adapter.
• Press lightly and slide the battery pack in the
direction of the arrow until it clicks.
• The charge indicator starts flashing. The indicator
will stay on when the charging is complete.
4. When the charging is complete, remove the
battery pack from the adapter.
5. Unplug the power cord from the power
outlet and disconnect it from the adapter.
Attaching the Battery Pack
1. Turn the POWER dial to OFF.
2. Attach the battery pack to the camcorder.
Press lightly and slide the battery pack up, in the
direction of the arrow until it clicks.
3. Remove the battery pack after use.
Holding the BATT.RELEASE button pressed down,
slide the battery pack down to remove it.
Charge indicator