Filter
Top Products
11D-Link DCS-5230 User Manual
Section 1 - Product Overview
Cable Installation
Connect an Ethernet cable to the Ethernet port located on the camera’s back panel
and attach it to the network.
Note: An Ethernet cable is required during initial setup. Once your wireless configuration
has been set up, you may disconnect the Ethernet cable and begin communicating
wirelessly with your DCS-5230.
Attach the external power supply to the DC power input connector located on the
camera’s side panel, and connect the adapter to an AC power outlet.
Connect the 3.5mm audio connector from a speaker to the Audio Out port.