Filter
Top Products
40D-Link DCS-5230 User Manual
Section 3 - Configuration
Use the Set As Home button to set the current position as the home position. The Home position is the rst
position the camera goes to after the camera boots. You can also recall the default home position, use the
Default Home button.
To use the Auto Patrol feature, select the desired preset positions from the Preset Locations list and add
them to the Selected Locations list by clicking Select. You can then select the order in which the camera will
patrol through the preset locations by selecting a location and clicking Up or Down. Click Remove to remove
a location from the list.
Set as Home:
Patrol Selection: