Filter
Top Products
30D-Link DCS-5230 User Manual
Section 3 - Configuration
PPPoE Settings:
HTTP Port:
RTSP Port:
Note:
If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE
account. You can get this information from your Internet service provider (ISP).
This is the port that allows the user to connect to the camera’s user interface. By default the port is set to 80.
You may change the port number if using multiple cameras.
This is the port that the camera uses to stream video to. By default the port is set to 554. You may change the
port number if using multiple cameras.
You MUST also set up your router/gateway for Port Forwarding/Mapping; this will enable remote viewing of
your camera via the Internet. Please refer to your router’s instruction manual on how to open up ports. For
additional help on conguring your camera to work with your router, please refer to Installing the DCS-5230
Behind a Router later in the User Manual. For installing multiple cameras, ONE port per camera must be
opened on your router, the Web server (HTTP) port. Also, some browsers may restrict some ports, such as
1 or 22, for security purposes. If you have problems accessing your camera through HTTP, try using a port
higher than 1024.
After making any changes, click the Save Settings button to save your changes, or click the Don’t Save
Settings button to discard your changes.