Filter
Top Products
38D-Link DCS-5230 User Manual
Section 3 - Configuration
Used to adjust the hour of time servers for
local settings.
Check this to enable daylight saving
time.
Set daylight saving time start and end date
by your local denition.
Synchronize with the NTP server over the
Internet whenever the DCS-5230 starts
up. It will fail if the assigned time server
cannot be reached.
Assign the IP address or domain name of
the time server. Leaving the text box blank
will let the DCS-5230 connect to default
time servers.
Used to adjust the hour of time servers
for local settings. The time interval for the
camera to update the time settings from
a NTP server.
Adjust the date and time according to what is selected by the administrator.
Synchronize the date and time of DCS-5230 with your local computer. The date and time of the PC is displayed
and updated in the DCS-5230.
Time and Date
Click on the Time and Date button to access the settings from the left side of the Setup menu.
Time zone:
Enable Daylight Saving:
Daylight Saving Dates:
Enable NTP Server:
NTP server Used:
Update interval:
Set the date and time
manually:
Copy Your Computer’s time
Settings: