Filter
Top Products
44D-Link DCS-5230 User Manual
Section 3 - Configuration
Check this box to enable the snapshot feature.
This will set the camera to take a snapshot whenever motion is detected.
This will set the camera to take a snapshot whenever a signal is sent to the D/I input. You can nd more
information about the DI/DO interface at the end of this document.
When checked, the camera will send the snapshots it takes to the e-mail address specied in the following
text boxes. If you do not know what to enter for the User Name, Password, or SMTP Mail Server, contact your
e-mail service provider for details.
Enter the username or login name for your e-mail account.
Enter the password for your e-mail account.
Enter the SMTP server for your e-mail account.
Enter the e-mail address you want to appear as the “From:” e-mail address in the snapshot e-mail.
Enter the e-mail address you want to send your snapshots to.
Enter the port used by your SMTP server.
Clicking this button will take a snapshot and will try to upload it to your FTP server using the settings you have
entered.
Snapshot
Enable Snapshot:
Motion Detector:
D/I:
E-mail Address:
User Name:
Password:
SMTP Mail Server:
Sender E-mail Address:
Recipient E-mail Address:
Port:
Test:
Here, you can set the camera to take snapshots when motion is detected and/or when a signal is sent to the DI input.
Snapshots can be sent to an e-mail address and/or to an FTP server.