D-Link DCS-5230 Security Camera User Manual


  Open as PDF
of 91
 
48D-Link DCS-5230 User Manual
Section 3 - Configuration
Click Apply on this screen to restore the factory default settings. After conrmation, the system will restart and require
the DCC program to locate the IP address of the DCS-5230.
System
Clicking Save Conguration allows you
to save a copy of the camera’s current
conguration to a location which you
specify.
If you have previously backed up a your
camera’s conguration, you can restore
it using this menu. Click Browse, and
locate the le on your computer. Click
Load Configuration to restore the
backup. This will erase your current
settings.
This option will reset the camera back to
its factory default settings. This will erase
your current settings.
Clicking this button will restart the
camera.
Save to Local Hard Drive:
Load from Local Hard
Drive:
Restore to Factory Default:
Reboot Device:
 previous next