Filter
Top Products
Setting the clock
Your camera can record the time and date of your
pictures automatically. When you transfer pictures from
the camera to your computer, you can see exactly when
each shot was taken.
In order to have the time and date recorded, you need to
set the camera’s clock using the camera’s LCD monitor,
or by using the Set Time feature described below. The
camera’s clock will continue to keep time accurately until
you replace the batteries. See page 1-10 for instructions
on setting the camera’s clock using the LCD monitor.
Follow these steps to set the camera’s clock from your
computer:
1. Click the
Set Time
button. The Set Camera Time and
Date dialog box appears. The camera’s time and date
settings are shown. If you have not made the time
and date settings in your camera, the computer’s
time and date settings are shown.
2. Use the arrows to change the time and date. If you
want to set your camera to your computer’s time and
date, click the
Copy From Computer
button.
3. Click
OK
. EPSON Photo!2 updates the time and date
in your camera.
Changing the camera ID
If you want to change the name that is used to identify
the camera when it is connected to a computer, simply
type a new name into the Camera ID edit box. The
camera name appears on the introductory screen when
you start EPSON Photo!2 and in the About dialog box.
You can also see your camera ID by clicking on the
Photo Info
button.
About button
Click the
About
button to see an introductory screen
showing the camera ID and firmware version. Click
OK
to return to the Setup menu.
L
EPSON Photo!2 Rev.C
A5 size Chapter 2
5/8/98 pass 0
2-24
Using EPSON Photo!2