Filter
Top Products
Using the LCD Display 42
R4CC960
User’s Guide Rev. G
LCD.FM A5 size
10/12/04
R
Proof Sign-off:
ABE S. Yamamoto, H. Honda
T. Takahashi
S. Halvorson
4
4
4
4
4
4
4
4
4
4
Basic Setup menu
How to open the menu
To open the Basic Setup menu, follow the steps below.
1. Press the MENU button in playback mode. The Main menu is
displayed.
2. Use the JOG dial to select Camera Settings, then press the ENTER
button. The Camera Settings menu is displayed.
3. Select Basic Setup and press the ENTER button. The Basic Setup
menu is displayed.
Calibrate Needles Displays the Needle Calibration menu to adjust
the following four needles: E (number of
remaining photos), R (photo quality), E
(remaining battery power), and A (white
balance). These settings are indicated on the
status gauge.
Initialize Settings Resets the current settings (except date and
time settings) to their default values.
Function Description
Function Description
Time and Date Sets the date (year, month, and day) and time
(hours and minutes).
Date Format Selects date display format from the following:
YYYY/MM/DD (default setting)
MM/DD/YYYY
DD/MM/YYYY
Power Save Timer Selects the length of time before the camera
enters Power Save Timer mode.
Choices include 3 min, 5 min (default setting),
10 min, or 20 min.
Sequential Numbering Specifies whether to continue numbering
images sequentially when you replace a
memory card.
On (default): sequential numbering continues
even if the memory card is replaced.
Off: numbering resists at 1 when the memory
card is replaced.
LCD Brightness Sets the brightness of the LCD display.
Language Selects the language used on the LCD menus:
Japanese, English, French, German, Italian,
Spanish, Dutch, T-Chinese