Filter
Top Products
42
Set the Mode dial to "S".
This is an automatic mode that allows you to set
the shutter speed. Use this mode for shots where
you want to freeze a moving subject (fast shutter
speed) or convey the impression of movement
(slow shutter speed).
'-;' N
r 1
-4-
Shu_er speed
Turn the Command dial to select the shutter speed.
• Shutter speed settings
3 sec. to 1/1000 sec. in 1/3 EV increments
,...........@ The shutter speed and aperture setting display @ ......
In scenes that are extremely overexposed, the
/_ aperture setting (F8) appears in red. When this
occurs, select a faster shutter speed (up to 1/1000
r.l_l sec.).
F8j
i Ioverexposodl
lUnderexposedl
IMetering failedl
D
rJrl
_i F2.8 i
In scenes that are extremely underexposed, the
aperture setting (F2.8) appears in red. When this
occurs, select a slower shutter speed (down to 3
sec.).
F---I
When the brightness of the subject is outside the
camera's brightness metering range, "F---" appears
as the aperture setting. When this occurs, press the
Shutter button down halfway to measure the light
level again and display avalue.
Set the Mode dial to "A".
This is an automatic mode that allows you to set
the aperture.
You can use this mode for shots where you want to
have the background out of focus (large aperture)
or have both near and far objects in focus at the
same time (small aperture).
D
r j,.1
Aperture
1
D@
Turn the Command dial to select the aperture.
• Aperture settings
F2.8 to F8 in 1/3 EV increments
............@ The shutter speed and aperture setting display @
I I
In scenes that are extremely overexposed, the
IOverexp°sedl _ shutter speed setting (1/1000 sec.) appears in red.
When this occurs, select a larger number of aperture
r_ll (up to FS).
L_O 0 : I
IUnderexposedI
IMetering failed I
r_l_l
@" I
r..I_1
In scenes that are extremely underexposed, the
shutter speed setting (3 sec.) appears in red. When
this occurs, select a smaller number of aperture
(down to F2.8).
;,:tWhen Forced flash mode is selected, the slowest available
shutter speed is 1/60sec.
When the brightness of the subject is outside the
camera's brightness metering range, "----" appears
as the shutter speed setting. When this occurs, press
the Shutter button down halfway to measure the light
level again and display a value.
43