Filter
Top Products
Whenattachingthestraptothecamera,attachthemetalstrapcliptothecamerabeforethreading
thestrapthroughtheclip.Thisdescriptionexplainshowtoattachthestrapusingtheclipattaching
toolprovidedtomakeattachingthemetalstrapclipeasier.
(Numbersl to8refertotheillustrations.)
!
_b,_ Clip attaching tool
fl Gap
/ Metal strap clip
Checking that the metal strap clip is facing the right
way, slide the clip fully into the clip attaching tool
and open up the gap in the strap clip.
_t Keep the clip attaching tool in a safe place as you will also
need it for removing the metal strap clip from the camera.
2
Hook the open metal strap clip through the strap
mount on the camera.
3
@Once the clip is securely hooked through the
strap mount, hold the clip in place as you
remove the clip attaching tool.
@Turn the metal strap clip around once until it
clicks closed and is fully threaded onto the strap
mount.
4
Face the black side of the cover towards the
camera and attach the strap by threading the strap
through the strap clip, starting from the notched
side.
Repeat steps 1 to 4, to attach the other end of the
strap.
5
6
@
Fastener@
lens cap holder
@Attach the lens cap cord by threading it through
the metal strap clip near the terminal cover.
@Attach the lens cap by pressing in on each side
of the cap.
_;;'_Attach the lens cap cord to the camera to avoid losing the
lens cap.
Remove fasteners @ and _BIfrom only one side of
the shoulder strap. Then pass the shoulder strap
through the lens cap holder and then back through
fasteners @ and BI.
7
Thread the strap through the protective cover and
metal strap clip.
8
Thread the strap through the buckle and retainer.
Repeat steps 7 to 8 to attach the other end of the
strap.
@ Using the lens cap holder @
To ensure that the lens cap does not appear in your
shot when you take a picture, attach it to the lens cap
holder.
10 11