Filter
Top Products
!
2
i4
3
r..1_1
I. .I
The self-timer is used for taking pictures such
as group shots where the photographer is
included in the shot.
Change the white balance setting to take a
picture with the white balance fixed for the
surroundings and lighting when the picture is
taken.
This sets the focusing method.
Change this setting for scenes where the
brightness of the subject and background differ
markedly so that the MULTI setting does not
give the desired photometering results.
Press the "MENU/OK" button to display the menu.
@ Press "_11" or "1_." to select the menu item and
"&" or "T" to change the setting.
@Press the "MENU/OK" button to confirm the
selection.
When you enable the setting, an icon appears in
the top-left corner of the screen.
The settings available in the menu screen vary depending on
the Still photography mode.
Use this setting to soften or emphasize outlines
or to adjust the quality of the photographed
image.
Multiple exposure provides a way of overlaying
photographed images on top of each other to
give a final image.
Change this setting to adjust the amount of light
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
Select the external flash setting to use an
external flash.
_w_ :11_l i h;_1:1:n :J-"[ell[oI_ :F_,q:J-"k'
!
The self-timer is used in situations such as group
shots where the photographer is included in the shot.
When selecting the self-timer setting, the self-timer
icon appears on the screen.
@: The shot is taken after 10 seconds.
Q : The shot is taken after 2 seconds.
_The self-timer setting is automatically cancelled in the
following situations.
• When shooting ends
• When the Mode dial is changed to another setting
• When the Playback mode is selected
• When the camera is turned off
...........@ Using the 2-second self-timer @
This is useful when you have the camera on a tripod and you want to avoid camera shake.
2
(.1)Press the Shutter button down halfway to focus
on the subject.
@Without releasing the Shutter button, press the
button all the way down (fully pressed) to start
the self-timer.
_The AF/AE lock can be also used (_P.27).
_[ Take care not to stand in front of the lens when pressing the
Shutter button as this can prevent the correct focus or
brightness (exposure) being obtained.
3
The self-timer lamp lights and then starts blinking
until the picture is taken.
_[ To stop the self-timer, once it has started running,press the
"BACK" button.
• Self-timer lamp display
_) Lit for 5seconds _ Blinkingfor 5 seconds.
_ Blinking for2 seconds
4
A countdown appears on the screen indicating the
time remaining until the picture is taken.
Self-timer mode is automatically cancelled after
each shot.
Use this setting to photograph the same image
with different exposure settings.
58 59