FujiFilm S7000 Digital Camera User Manual


 
iliiii:iiii!l!iillii i)
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
Compatible Mac Power Macintosh G3'_1, PowerBook G3_1,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube or PowerBook G4
Operating System Mac OS 90 to 922 _2
RAM 64 MB minimum _'3
Minimum 256 MB when RAW FILE CONVERTER LE is used
(When ImageMixer VCD2 for FinePix is used: 128 MB or better)
Hard disk space Amount required for installation: 400 MB minimum
Amount required for operation: 600 MB minimum
(When ImageMixer VCD2 for FinePix: 2 GB or better)
Minimum 1 GB when RAW FILE CONVERTER LE is used
Display 800 × 600 pixels or better, at least 32,000 colors
(When ImageMixer VCD2 for FinePix: 1024 × 768 or better)
Internet connection ,_4 To use the FinePix Internet Service or mail attachment function
An Internet connection and e-mail transmission software
Connection speed: 56k or better recommended
Sound functions Speakers and microphone
"4:1Models with a USB port as a standard feature
"4:2This software does not run correctly in the Mac OS X Classic environment.
"4:3Turn virtual memory oll if necessary.
"4:4Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection
@ Notes @,
Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not
operate correctly if you use an extension cable or connect the camera via a USB hub.
Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection isfaulty.
Additional USB interface board is not guaranteed.
On Macintosh computers, allocate at least 400 MB of virtual memory when RAW FILE CONVERTER
LE is used. If other applications will be used at the same time, allocate the additional amount required
for those applications also.
/-_ _, Enable file exchange _,
Check whether File Exchange is active.
To use a media that is supported by the camera, the File Exchange utility supplied with Mac OS must
be running.
\ ....
Turn on your Macintosh and start up Mac OS 9.0 to 9.2.
Donot connectthe camerato your Macintosh until the software installation is completed.
Select the Extension Manager in the Control Panel and check that the File Exchange check box
is ticked. If not click in the box so that [] appears and then restart your Macintosh.
When you load the enclosed CD-ROM into the CD-ROM drive, the "FinePix" window
automatically opens.
Ifthe "FinePix" window does notopen automatically, double-cick the CD-ROM icon.
The Installer setup screen appears. Click the
[installing FinePixViewer] button.
_;tFor moreinformation on what is installed, click the [Read Me
First] buttonand [Using FinePixViewer]button.
A confirmation message appears asking whether you want to continue with the installation.
Click the [OK] button.
The User License Agreement for this software appears. Read the agreement carefully and
then, if you agree to the terms of the Agreement, click the [Agree] button. If you click the
[Disagree] button, the software is not installed.
Select the installation destination for FinePixViewer.
Q)Click the [Open] button to open the installation
destination folder.
Select tl_e i11_tallltiol
de stinatiol filter.
Click the [Save] button.
_ele(t the i_stallatiell
de_tinatioll fllltr
Install ImageMixer VCD2 for FinePix as directed by the on-screen instructions.
92 4 Double-click"Installer for MacOSP" to launch the Installer.
Co.t_', a ......93