FujiFilm S7000 Digital Camera User Manual


 
< CON_ > <RENEW>
0001 0001
0005 0005
0006 0001
0010 0005
4
Formatted media used for both A and B.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
CONT. :Pictures are stored beginning from the
highest file number stored on the last
media used.
RENEW: Pictures are stored on each media
beginning with a file number '0001".
Setting this function to 'CONT." makes file
management easier as it ensures that file names
are not duplicated when images are downloaded to
a PC,
When the camera settings are "I_RESET", the frame number
setting ("CONT." or "RENEW") is changed to "CONT." and
the frame number itself does not return to "0001".
_When the media already contains image files with file
numbers higher than the highest file number on the last
media, images are stored beginning from the highest file
number oll the current media.
Directory numb_lerLrJ
File number
Frame number
The file number can be checked by viewing the
image. The last 4 digits of the 7-digit number in the
top right corner of the screen are the file numbers,
while the first 3 digits show the directory number.
When changing the media, always turn the camera off before
opening the slot cover. Opening the slot cover without turning
the camera off, the Frame No. memory may not function.
File No. run from 0001 to 9999. Once 9999 is exceeded, the
directory number changes from 100 to 101. The maximum
number is 999-9999.
_The displayed frame number may differ for images
photographed on other cameras.
"_hWhen the "_" message appears, see P.111.
Setting CCD-RAW to ON disables the signal processing functions (reconstituting the data received
from the CCD as an image) performed on the camera. Consequently this task must be performed
on the computer.
Use the bundled RAW FILE CONVERTER LE software to perform the processing on a computer,
Conversion using RAW FILE CONVERTER LE also provides a simple way to create TIFF-format
images.
To rebuild images,FinePixViewer(onthe bundled CD_ROM)must be installedon yourcomputer.
The functions listed below cannot be used in CCD-RAW mode.
shooting• Digital zoom, Continuous shooting, and FinePix Photo mode (image quality, sensitivity (IS()
During
800) and FinePix COLOR) are unavailable.
During playback Playback image quality is fixed at _ (1280 x 960).
Playback can be zoomed up to 400%, but cropped images cannot be saved.
Connect the camera
with "[_ _ _"
selected as the USB
setting (--RIO0),
Connect the camera
with "1_ PC" selected
as the USB setting.
iiiiiii
Software used to read PDF-
format documents on a
personal computer. This
software is needed to read
the User's Guides for
FinePixViewer (Mac OS 9
only).
Creates a FinePix CD Album.
_# Note that the software configuration differs slightly depending on your operating system.
Converts CCD-RAW files to
Exif-TIFF format.
ii!i!i;ili
ii!i!i;ili
ii!i!i;ili
i!i!iliiii
88 89