Filter
Top Products
16
!
2
3
4
To turn the camera on, set the Power switch to "1_"
or "[_3". When turning the camera on, the indicator
lamp lights green.
To turn the camera off, set the Power switch to
"OFF".
The lens moves when the camera ts tn '!1_' mode.
Take care not to obstruct the lens as tt is a
precision component.
Obstructmg the lens wdl cause a malfunclon or
fau t and the '_£-d_€[-"! or _!l F00US ERRORq"
message will appear. Take care also not to get
fmgerpnnts on the camera lens as thts will result ]n
tmpatred tmage qualtty m your shots.
After purchasing the camera, first time when you
turn camera on the date is cleared. Press the
'MENU/OK" button to set the date and time.
_lf the confirmation message (see figure at left) does not
appear, refer to "Correcting the date and time" (_P.17) and
check and correct the date and time settings.
_The confirmation message is also shown when the camera
battery has been removed and the camera has been left in
storage for a long period of time.
,_t To set the date and time later, press the "BACK" button•
If you do not set the date and time, this confirmation message
will appear each time you turn the camera on.
Press "_11" or "1_." to select Year, Month, Day,
Hour or Minute.
@ Press "&" or 'T" to correct the setting.
;It Holding down "A" or "T" changes the numbers continuously•
- When the time displayed passes "12:00", the AM/PM setting
automatically changes.
Once you have set the date and time, press the
'MENU/OK" button. Pressing the "MENU/OK"
button changes the camera to Photography or
Playback mode.
At the time of purchase and after leaving the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been fitted for 2 hours
or more, the camera settings will be retained for roughly 24
hours even if both sources of camera power are removed•
!
2
3
I1@
II
(!) Set the Power switch to "lffl".
(_)Set the Mode dial to "SET".
(!) Press "&" or "T" to select "DATE/TIME".
(_)Press "1_".
(!)Press "_11"or "1_" to select Year, Month, Day,
Hour or Minute.
(_) Press "&" or "T" to correct the setting.
(3)Always press the "MENU/OK" button after the
settings are completed.
i Holding down "A" or "T" the numbers change continuously.
• _;tWhen the time displayed passes "12:00", the AMiPM setting
automatically changes.
/
(!) Press "_11" or "_-" to select the date order.
(_) Press "&" or "V" to set the order. Refer to the
table below for details of the settings.
_Always press the "MENU/OK" button after the
settings are completed.
Date order I format. Explanation I
Displays the date in the "year.month. day"
YYYY.MM.DD format.
Displays the date in the "month/day/ year"
MM/DDiYYYY format.
DD.MM.YYYY Displays the date in the "day.month. year"
17