Filter
Top Products
3-17
3.3 Cleaning the Rollers
3
DAILY CARE
6. Wipe the Brake roller unit using a lint free cloth moistened with cleaner
F1.
7. Re-install the Brake roller unit in the reverse order of its removal. By
holding the bail toward you, put the Brake roller into bracket and rotate
down until it locks in.
8. Install the Guide plate in the reverse order of the removal. By pressing the
Guide plate down, and pushing the Guide plate back, you can install it
smoothly.
9. Lower the ADF upper sheet guide carefully.
10. Lift the Upper transport unit to release the safety lock, then lower the unit
carefully and push the unit to close it completely.
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities of
the cleaner. In addition, wipe off the cleaner completely with a soft lint-free
cloth to leave no residue on the surface of the cleaned parts.
Brake roller