Filter
Top Products
3-23
3.4 Cleaning the Transport Path
3
DAILY CARE
2. Wipe and clean the whole transport path using a cloth moistened with
cleaner F1.
3. Lift the Upper transport unit to release the safety lock, then lower the unit
carefully and push the unit to close it completely.
HINT
Vacuum the transport path if there are paper dust in the path.
Do not use aerosol sprays to clean the path.
CAUTION
Do not use HIgh Pressure Air to blow dust out of the scanner. This will con-
taminate the optics and mechanism.
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities of
the cleaner. In addition, wipe off the cleaner completely with a soft lint-free
cloth to leave no residue on the surface of the cleaned parts.
Transport path