Filter
Top Products
3-34
3.6 Cleaning the Glass Surface
3. Wipe the Glass sheet guide using a clean lint free cloth moistened with
cleaner F1.
4. Lift the tabs until the Guide locks in. Close the Glass sheet guide. Make
sure that the metal part locks.
5. Lift the Upper transport unit to release the safety lock, then lower the unit
carefully and push the unit to close it completely.
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities of
the cleaner. In addition, wipe off the cleaner completely with a soft lint-free
cloth to leave no residue on the surface of the cleaned parts.
Glass sheet guide
Tab