Filter
Top Products
3-40
3.7 Cleaning the Sensors
2. Wipe SF1.5 and SF2 sensor surfaces with a clean lint free cloth moistened
with cleaner F1.
3. Lift the Upper transport unit to release the safety lock, then lower the unit
carefully and push the unit to close it completely.
ATTENTION
It may take long before the cleaner vaporizes if a large quantity is used.
When cleaning the scanner parts, dampen a cloth with modest quantities of
the cleaner. In addition, wipe off the cleaner completely with a soft lint-free
cloth to leave no residue on the surface of the cleaned parts.
SF2 Sensor
SF1.5 Sensor