Filter
Top Products
7-9
7.2 Setup mode functions
7
OPERATOR PANEL MENUS
7.2 Setup mode functions
There are 32 items in setup mode as shown in the following.
LCD
display
Descriptions Selectable
parameters
Default Mode Remarks
On-
line
Off-
line
Double Feed
(Multi-feed)
Specifies the double-feed
(Multi-feed) detection mode
based on:
1: Document overlapping /
thickness
2: Document overlapping /
thickness+ Brake roller
rotation amount
No/Yes
1: Overlapping /
Thickness
2: Overlapping /
Thickess+ Brake
roller
Yes Avail-
able
Avail-
able
Settings via the
PC have the
priority.
Length Check Specifies the double-feed
detection based on the
document length deviation.
There are 3 selections for the
acceptable length deviation
tolerance as shown right.
No/Yes
Yes:
10/15/20mm
(0.4/ 0.6/ 0.8 in.)
(Tolerance)
No Avail-
able
Avail-
able
Settings via the
PC have the
priority.
IPC
Pre-Set
The scan parameters are set
with recommended values
automatically. There are 5
choices as shown right.
No
1:
2:
3:
4:
5:
No Avail-
able
Avail-
able