Fujitsu M9000 Security Camera User Manual


 
rebootxscf(8)
System Administration 99
NAME rebootxscf - reset the XSCF
SYNOPSIS rebootxscf [[-q] -{y|n}]
rebootxscf -h
DESCRIPTION The rebootxscf(8) command resets the XSCF.
Privileges You must have platadm or fieldeng privilege to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
When you cancel the XSCF reset using the applynetwork(8), setdate(8),
sethttps(8), or setssh(8), which commands reset XSCF automatically, even if
you perform this command, the network information that is set is not applied in
XSCF.
EXAMPLES
EXAMPLE 1 Resets the XSCF.
EXAMPLE 2 Resets the XSCF. Automatically replies with 'y' to the prompt.
EXAMPLE 3 Resets the XSCF. Automatically replies with 'y' without displaying the
prompt.
EXAMPLE 4 Cancels the rebootxscf(8) command execution that is in progress.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-n Automatically answers 'n' (no) to all prompts.
-q Suppresses all messages to stdout, including prompts.
-y Automatically answers 'y' (yes) to all prompts.
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n]:y
XSCF> rebootxscf -y
The XSCF will be reset. Continue? [y|n]:y
XSCF> rebootxscf -q -y
XSCF> rebootxscf
The XSCF will be reset. Continue? [y|n]:n
XSCF>