Fujitsu M9000 Security Camera User Manual


 
flashupdate(8)
48 XSCF Reference Manual Last Revised January 2007
EXTENDED
DESCRIPTION
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
When the firmware is updated, the XSCF unit is reset. Therefore, LAN
connection to the XSCF is canceled if already established.
When there's a faulty FRU, can't update the firmware. Resolve the FRU fault
then update.
EXAMPLES
EXAMPLE 1 Check whether the entire firmware can be updated to version 1020.
-q Suppresses all messages to stdout, including prompts.
-s version Specifies a XCP comprehensive firmware version. For version,
specify a major version, minor version and micro version
continuously.
The XCP version number appears as xyyz by four digits, where:
x Major firmware release number
yy Minor release number
z Micro release number
-y Automatically answers 'y' (yes) to all prompts.
XSCF> flashupdate -c check -m xcp -s 1020