Fujitsu M9000 Security Camera User Manual


 
showtimezone(8)
366 XSCF Reference Manual Last Revised January 2007
EXTENDED
DESCRIPTION
The settimezone(8) command sets the time zone of the XSCF.
EXAMPLES
EXAMPLE 1 Displays the time zone.
EXAMPLE 2 Displays the Daylight Saving Time information as follows: the abbrevia-
tion of time zone is JST, the offset from GMT is +9, the name of Daylight
Saving Time isJDT, DaylightSaving Time is 1 hourahead, and the time pe-
riod is from the last Sunday of March 2:00 to the last Sunday of October
2:00.
EXAMPLE 3 Displays the Daylight Saving Time information as follows: the abbrevia-
tion of time zone is JST, the offset from GMT is +9, the name of Daylight
Saving Time isJDT, DaylightSaving Time is 1 hourahead, and the time pe-
riod is from the first Sunday of April 0:00 to the first Sunday of September
0:00.
EXAMPLE 4 When no Daylight Saving Time is set
EXIT STATUS The following exit values are returned:
SEE ALSO setdate(8), settimezone(8), showdate(8)
XSCF> showtimezone -c tz
Asia/Tokyo
XSCF>
showtimezone -c dst
JST-9JDT,M3.5.0,M10.5.0
XSCF>
showtimezone -c dst
JST-9JDT-10,M4.1.0/00:00:00,M9.1.0/00:00:00
XSCF>
showtimezone -c dst
0 Successful completion.
>0 An error occurred.