Filter
Top Products
showdomainmode(8)
System Administration 271
NAME showdomainmode - display the domain mode
SYNOPSIS showdomainmode -d domain_id
showdomainmode -h
DESCRIPTION showdomainmode(8) command displays the domain mode that is set for the
specified domain.
The following states are displayed:
Privileges You must have one of the following privileges to run this command:
Refer to setprivileges(8) for more information.
OPTIONS The following operands are supported:
HOST-ID Host ID
Diagnostic Level Displays the OpenBoot PROM diagnostic level. One of the
following is displayed:
none None
min Standard
max Maximum
menu Menu
Secure Mode Displays the states of the host watchdog function and
function that suppresses break signal reception (Break-
signal). One of the following is displayed:
on Enabled
off Disabled
Autoboot Displays the state of the auto boot function used at domain
startup. One of the following is displayed:
on Enabled
off Disabled
platadm, fieldeng Can run this command for all domains.
domainadm Can run this command only for your managed domains.
-d domain_id Specifies the domain ID of the domain to be displayed.
domain_id can be 0–23 depending on the system configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.