Filter
Top Products
sethttps(8)
System Administration 157
■ When the HTTPS server starts, the XSCF is reset.
■ The CSR is overwritten.
■ In case the XSCF unit is duplicated configuration, the setting automatically
reflected to the standby XSCF. When there's a defect on the standby XSCF, it
leads to an error.
■ The details of the current HTTPS service can be checked by using the
showhttps(8) command.
EXAMPLES
EXAMPLE 1 Starts the HTTPS service.
The reset continues after this point.
EXAMPLE 2 Stops the HTTPS service.
EXAMPLE 3 Creates a CSR with thefollowing settings: country: JP,state|province: Kana-
gawa, locality: Kawasaki, organization: Example, organizationalunit: devel-
opment, common: scf_host, e-mail: abc@example.com
EXAMPLE 4 Creates the self-certification authority with the following settings, and cre-
ates a self-signed web server certificate:country: JP, state|province: Kanaga-
wa, locality: Kawasaki, organization: Example, organizationalunit:
development, common: scf_host, e-mail: abc@example.com
EXAMPLE 5 Creates the private key of the web server.
XSCF> sethttps -c enable
The XSCF will be reset. Continue? [y|n] :y
Broadcast message from root (pts/4) (Jan 27 16:59:10 2006):
The system is going down for reboot NOW!
XSCF>
sethttps disable
XSCF> sethttps -c gencsr JP Kanagawa Kawasaki Example development
\ scf_host abc@example.com
Enter passphrase:
Verifying - Enter passphrase:
XSCF> sethttps -c selfsign JP Kanagawa Kawasaki Example
development scf_host abc@example.com
CA key and CA cert already exist. Do you still wish to update? [y|n] :y
Enter passphrase:
Verifying - Enter passphrase:
XSCF>
sethttps -c genserverkey
Server key already exists. Do you still wish to update? [y|n] :y
Enter passphrase:
Verifying - Enter passphrase: