Filter
Top Products
Remove the Pink Tape:
Do Not Touch Here
Prepare the printer and cartridge:
1. Make sure the power is on and you have removed the cardboard from inside the
printer.
2. Open the print cartridge access door of the printer.
3. Remove the bright pink tape from the cartridge.
Insert the cartridge:
1. If you are replacing a cartridge, push down and pull outward on the cartridge in
the cradle to remove it.
2. Hold the replacement cartridge with the label on top. Slide the cartridge at a slight
upward angle into the cradle so the copper-colored contacts go in first. Push the
cartridge until it snaps into place.
3. Close the print cartridge access door.
The camera Image Display shows an icon with the approximate ink level for the
installed cartridge (100–66%, 65–33%, or 32–0%). No ink-level icon appears if the
cartridge is not a genuine HP cartridge.
Each time you install or replace a print cartridge, a message appears on the camera
Image Display asking you to load plain paper so the printer can align the cartridge.
This ensures high-quality prints.
Chapter 2
20 HP Photosmart 420 series GoGo Photo Studio