Filter
Top Products
11
Getting started
TIP: If you need to change the date and time settings later,
you can do this with the Date & Time setting in the Setup
menu. See Chapter 5, Using the Setup Menu.
5. Install and format a memory card
(optional)
Your camera contains internal memory that allows you to
store images and video clips. However, you can use a
memory card (purchased separately) instead to store images
and video clips. For more information about supported
memory cards, see Storage on page 121.
1. Turn off the camera and open
the Battery/Memory card
door on the side of the
camera.
2. Insert the memory card in the
small slot behind the batteries,
with the notched end of the
card going in first, as shown.
Make sure the memory card
snaps into place.
3. Close the Battery/Memory
card door and turn on the camera.
4. Press the button, then use the button to move to the
Playback Menu .
5. Press the button to highlight Delete, and then press the
button to display the Delete sub-menu.
6. Use the button to highlight Format Card, and then
press the button to display the Format Card
confirmation screen.