Filter
Top Products
8
HP Photosmart E327 User Guide
Setup
To locate a part on your camera (such as a button or a light)
while following the instructions in this section, see Camera
parts on page 14.
1. Install the batteries
1. Open the Battery/Memory card door on
the side of the camera by sliding the
door toward the front of the camera.
2. Insert the batteries as indicated inside
the door.
3. Close the Battery/Memory card door by
pushing the door down and sliding the
door toward the back of the camera until
the door latches.
For the performance of NiMH, Lithium, and
Alkaline batteries when used with this camera, see
Performance per battery type on page 106. For the number
of shots you can expect to get for each battery type based
on usage, see Number of shots per battery type on
page 107. For hints on optimizing battery performance, see
Appendix A, Managing batteries, starting on page 103.
TIP: If you use rechargeable NiMH batteries, you can
recharge the batteries in the optional HP Photosmart
quick recharger. For more information, see Appendix B,
Purchasing camera accessories, starting on page 113.