Filter
Top Products
149
English
QR34962
Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message appears,
refer to the following table and take appropriate corrective action.
Messages on page 150 and later are arranged in alphabetical order.
Message Cause & Troubleshooting
Reference
page
(1)Dataerrorina partof
image file. Repair data
now?
(2)Founderrorin image
file. Repair data now?
(3) Data error in all
image file. Repair all
data now?
Itispossiblethatthesystemcannotnormallycompletewritingoffile
when power is turned off for some reason during recording or
editing(deleting,dividingorcombiningscenes,orcreatingplaylist).
Selecting “YES” will automatically repair the video file, but even if
“NO” is selected, the same message will appear when the DVD
video camera/recorder is turned on next time. (Donot remove the
disc while the DVD video camera/recorder is recognizing it:
Ignoring this will deactivate the file repair function.)
Follow the instructions on screen, taking note of the following
cautions:
• Datamay not berepaired, depending onthe timing when power
was turned off.
• Data may not be repaired normally if data recorded on another
recorder is mixed in.
• The repaired data may be different from the original recorded
content because of partial deletion of defective portion.
• Sincethe date/timefor repair isaddedto therepaired data (only
the corrected portion for partial repair), the original date/time
information will be lost.
• Since all movies, and then all stills, are repaired, the order of
recorded contents will be lost.
(In case of message (2) (3) only)
• See*1onpage155
(1)Discisnotformatted.
If it formats, it becomes
possible to use for
camera.
(2) However, when you
record from PC
connection terminal,
please do not format.
(3)Formatthediscnow?
DVD-R disc that was not initialized for camera use was inserted.
42
(1) Error has occurred.
Please restart.
• Errorhasoccurred.TrytorestarttheDVDvideocamera/recorder
using the following methods:
(1)Turnpoweroff,removethebatteryorACadapter/chargerand
reattach it, and then turn power on again.
(2) Turn power off, and reinsert the disc. Then turn power on
again.
(3) Take noteof the number (xxxx), and then consult your dealer.
• See *3 on page 155.
8, 37, 40, 41
(2) Error has occurred.
Please reinsert a disc.
(3) Error has occurred.
Error code No. xxxx.
Pleasereadthemanual.
(4) ERROR xxxx
Batteryisalmostempty.
Replace it.
Replace witit.