Filter
Top Products
151
English
QR34962
Card has no data. This message will appear when the button is pressed with a
card inserted on which no still is recorded. (It will appear if you
attemptplayback or editing onDisc Navigation, butwill notappear
if you press
on camera through image.)
Card is not formatted.
Format the card now?
Was the card formatted onPC? When using the card on this DVD
video camera/recorder, choose “YES” and format it.
127
Control Information
Error.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
128
• Use another disc.
• See *3 on page 155.
22, 76
COPY PROTECTED The video signal input to this DVD video camera/recorder may be
copy-guarded.
Some prerecorded video materials, such as movies, are guarded
against copying.
Copy-guarded materials cannot be recorded on this DVD video
camera/recorder.
66
DISCACCESS Therecordedsceneisbeingstoredondisc.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
50, 53
This DVD video camera/recorder is verifying whether the correct
disc has been inserted.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
This message will be displayed for a little longer when the date
changes.
DISC ALMOST FULL The disc will soon be full, and recording will be impossible.
Delete unnecessary scenes andtry the disc again, or use another
disc.
26, 27, 101
Discerrorhasoccurred.
Finalizing is not
complete.
• Disc error occurred during finalizing, and finalizing failed.
Replace the disc.
• See*3on155
129
Discerrorhasoccurred.
Format the disc now?
• Has the disc been initialized on PC? Has initializing the disc on
PC been interrupted?
Choose “YES” and initialize the disc when using it on this DVD
videocamera/recorder.Initializingthediscwillerasealldataonit.
• See *2 on page 155.
127
Discerrorhasoccurred.
Formatting is not
complete.
The disc may be dirty.
Removethediscandwipeofffingerprints,dust,etc.beforereusing
it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
76, 127
Discerrorhasoccurred.
Keep disc inside &
restart.
Disc error could have occurred during editing of scenes.
TurnofftheDVDvideocamera/recorderwiththediscbeingusedin
it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
40
Message Cause & Troubleshooting
Reference
page