Filter
Top Products
43
Image Capture Option
This is to configure image capture options when an event is triggered. When an event occurs,
you can get the pre-event and post-event images by setting "Before event" and "After event."
Before event:
You may set the starting time to capture an image before the event is triggered. (Input limitation
is from 0 to 30 seconds.)
After event:
You may set the finishing time to capture an image after the event is triggered. (Input limitation
is from 0 to 30 seconds.)
Image capture frame rate:
Set from 1 to 15 fps when an image is being captured.
Image file name:
You may designate the image file name to send e-mail or FPT after an image is captured. All
captured images are saved as .avi files (for example: Filename.avi).
Image file type:
You can choose between two options. AVI means that the camera transmits a video file. JPG
means that the camera transmits a series of single JPEG images.
Append to the image file name:
You may add information to the image file name.
- Camera IP address (example: filename_192.168.1.19.avi).
- Date and time (example: filename_20020218150030.avi).
- Trigger condition flag: When selecting "Activation of digital input port," "D" may be added to the
image file name (example: filename_D.avi); when selecting "Periodically every…," "P" is added
to image file name (example: filename_P.avi).
- Image sequence number: With this option, you may classify a file with the same name with
consecutive numbers from 000 to 999 (example: When you designate file name as "camera"
and select "Image sequence number," the file name appears as camera001.avi,"
"camera002.avi" and so on through "camera999.avi").