Filter
Top Products
57
Expand/Collapse the Camera Information and Message Window
Camera Information
Displays information such as frame rate
(F/S), camera type, stream type, camera
IP and user name.
Log Messages
Displays information about changed configurations
and connected cameras.
Adding a camera
To add a camera, simply double-click the location on the screen (upper left, lower left, upper
right and lower right square). Enter the correct settings in the configuration window and click
"OK."
Check here if you use dynamic DNS
and then enter your DynDNS domain
name into the configuration.
Specify the image transfer port of your
camera (select MPEG4 unless you have
changed the camera settings).
Select MPEG4: Camera & Server
Additional image parameters
Enter the maximum frame rate of the video.
IP Address
User ID and Password