Filter
Top Products
20 EN
SNAP MODE –
FULL
MUL TI –
4
MUL TI –
9
NEGA POS I
PIN–UP
FRAME
* There is the sound effect of a shutter closing.
√
When “FULL”, “FRAME”, “PIN-UP” or “NEGA
POSI” is selected, snapshot recording will always be
performed with higher quality (
੬ pg. 24) even if
“CAMERA MODE” is set to “VIDEO”.
RECORDING
Basic Recording For Video (cont.)
Snapshot (For Video Recording)
This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the Shooting Mode Switch to “VIDEO”, then set the
Power Switch to “
” while pressing down the Lock
Button located on the switch. Pull out the viewfinder
fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select “ CAMERA”. Press
it and the CAMERA Menu appears.
4
Rotate the MENU wheel to select “SNAP MODE”, then
press it.
5
Rotate the MENU wheel to select the desired Snapshot
mode, then press it.
Rotate the MENU wheel to select “
1
RETURN” and press
it twice. The Menu Screen closes.
SNAPSHOT RECORDING
1
Set “CAMERA MODE” to “VIDEO” or “PS-VIDEO” in the
Menu Screen (
੬ pg. 28, 29).
2
Press SNAPSHOT.
If you press during Record-Standby . . .
..... “PHOTO” appears and a still image will be recorded
for approx. 6 seconds, then the camcorder re-enters
the Record-Standby mode.
If you press during Recording . . .
..... “PHOTO” appears and a still image will be recorded
for approx. 6 seconds, then the normal recording
resumes.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar to serial
photography. (Interval between still images: approx. 1 second)
NOTES:
●
To remove the shutter sound,
੬
“BEEP” on pg. 31.
●
If Digital Zoom is used while in the “MULTI-4” or “MULTI-
9” mode, Snapshot recording will be performed with 10X
magnification.
●
If Snapshot recording is not possible, “PHOTO” blinks when
SNAPSHOT is pressed.
●
If Program AE with special effects (
੬
pg. 36) is engaged,
certain modes of Program AE with special effects are disabled
during Snapshot recording. In such a case, the icon blinks.
●
If SNAPSHOT is pressed when “DIS” is set to “ON”
(
੬
pg. 29), the Stabilizer will be disabled.
●
To dub images recorded on a tape to a memory card,
੬
pg. 60.
●
When shooting in the Multi-Analyzer 4 or Multi-Analyzer 9
modes, the optional flash (
੬
pg. 83) will not light.
●
During playback as well, all snapshot modes except Nega/
Posi mode are available when “
COPY” is set to
“OFF” in the Menu Screen (
੬
pg. 41).
●
When a headphone set is connected to the PHONE
connector, the shutter sound is not heard from the speaker,
however it is recorded onto the tape.
Power Switch
Display
Lock Button
Shooting
Mode Switch
MULTI-9
Multi-Analyzer 9
FULL
Snapshot mode
with no frame*
√
FRAME
Snapshot mode
with frame*
√
MULTI-4
Multi-Analyzer 4
NEGA POSI
Nega/Posi mode*
√
PIN-UP
Pin-Up mode
√
Menu Screen
SNAPSHOT
Button