Filter
Top Products
74 EN
TROUBLESHOOTING
(cont.)
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
7.
The cassette will not load
properly.
8.
The memory card will not
load properly.
9.
In the 5-Second mode,
recording ends before
5 seconds have elapsed.
10.
Snapshot mode cannot be
used.
11.
The color of Snapshot
looks strange.
12.
The image taken using
Snapshot is too dark.
13.
The image taken using
Snapshot is too bright.
14.
Digital Zoom does not
work.
15.
Program AE with special
effects and Fade/Wipe
Effects do not work.
16.
The Black & White Fader
does not work.
7.
•The cassette is in the wrong
position.
•The battery’s charge is low.
8.
•The memory card is in the
wrong position.
9.
•The 5-Second mode is set to
“ANIM.” in the Menu
Screen.
10.
•The Squeeze mode is
selected.
11.
•The light source or the
subject does not include
white. Or there are various
different light sources behind
the subject.
•The Sepia or Monotone
mode is activated.
12.
•Shooting was performed
under backlit conditions.
13.
•The subject is too bright.
14.
•10X optical zoom is selected.
•The Shooting Mode Switch is
set to “XGA/VGA” or
“UXGA”.
•“PROGRAM AE” is set to
“VIDEO ECHO” in the Menu
Screen.
•“WIDE MODE” is set to “PS-
WIDE” in the Menu Screen.
•Multi-Analyzer 4 or Multi-
Analyzer 9 was attempted
during Digital Zoom.
•Picture Wipe or Dissolve are
being used in a scene
transition.
15.
•The Power Switch is set to
“ ”.
16.
•The Sepia or Monotone
mode is activated.
7.
•Set it in the right position
(੬ pg. 12).
•Install a fully charged
battery (੬ pg. 8, 9).
8.
•Set it in the right position
(੬ pg. 13).
9.
•Select “5S” in the Menu
Screen (੬ pg. 33).
10.
•Disengage the Squeeze
mode (੬ pg. 30).
11.
•Find a white subject and
compose your shot so that it
also appears in the frame
(੬ pg. 20, 21).
•Turn off Sepia and Mono-
tone (੬ pg. 36, 37).
12.
•Press the BACKLIGHT
Button (੬ pg. 38).
13.
•Set “PROGRAM AE” to
“SPOTLIGHT” in the Menu
Screen (੬ pg. 36).
14.
•Set “ZOOM” to “40X” or
“300X” in the Menu Screen
(੬ pg. 29).
•Set the Shooting Mode
Switch to “VIDEO”
(੬ pg. 14, 22).
•Disengage the “VIDEO
ECHO” mode
(੬ pg. 22, 37).
•Disengage the “PS-WIDE”
mode (੬ pg. 30).
•Disengage Multi-Analyzer 4
or Multi-Analyzer 9
(੬ pg. 20).
•Wait until the Picture Wipe
or Dissolve effects are
completed (੬ pg. 22, 34).
15.
•Set the Power Switch to
“ ” (੬ pg. 34, 36).
16.
•Turn off Sepia and Mono-
tone (੬ pg. 34, 36).