Filter
Top Products
EN41
PLAYBACK
Advanced Features For Video
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
IN UTS/AV P
COPY
STEREO
–
SOUND
1
SP
OFF
OFF
–
–
–
–
–
NRETUR
O.O
Using Menus For Detailed Adjustment
The following procedure applies to all except
Synchro
Comp (
੬
pg. 69, 70).
1
Set the Power Switch to “ ” while pressing down
the Lock Button located on the switch.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select the desired function
menu, and press it. The selected function menu appears.
4
Rotate the MENU wheel to select the desired
function, and press it to display the Sub Menu.
5
Rotate the MENU wheel to select the desired
parameter and press it. Selection is complete.
6
Rotate the MENU wheel to select “
1
RETURN” and
press it twice to close the Menu Screen.
Display
Power Switch
MENU Wheel
੬ pg. 42.
੬ pg. 42.
੬ pg. 70.
Allows you to set the video recording
mode (SP or LP) depending on your
preference (
੬ pg. 15).
It is recommended you use “REC
MODE” in the “
VIDEO” Menu
when using this camcorder as a
recorder during dubbing
(੬ pg. 58, 59).
ON: Enables dubbing of images
recorded on a tape to a memory
card (
੬ pg. 60).
OFF: Enables snapshots to be taken
during video playback.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors (
੬ pg. 58).
OFF: Enables audio/video signal
output to a TV, VCR, etc. via the AV
and S-VIDEO connectors
(੬ pg. 54, 58).
Makes a beep or melody sound/
activates the shutter sound effect.
Turns on/off the tally lamp.
Starts automatic demonstration.
Makes the camcorder’s indications
appear/disappear from the
connected TV screen.
Makes the date/time appear/
disappear on the camcorder.
Makes the time code appear/
disappear on the camcorder.
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
BEEP*
TALLY*
DEMO MODE*
ON SCREEN*
DATE/TIME*
TIME CODE*
Menu Screen
Lock Button
Recording Start/Stop Button
* Each setting is linked with “ DISPLAY” or
“ SYSTEM”, which appears when the
Power Switch is set to “ ” (੬ pg. 31). The
parameters are the same as in the description
on pg. 31.
NOTES:
●
It is also possible to change the ON SCREEN
settings by pressing DISPLAY on the remote
control (provided).
●
“REC MODE” can be set when the Power
Switch is set to “ ” or “ ” (
੬
pg. 15, 29).
●
When “S/AV INPUT” is set to “ON”,
camcorder playback cannot be viewed on
the AV output.
VIDEO
DISPLAY
SYSTEM