Filter
Top Products
EN7
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is
set to “ON” (factory-preset).
Ⅲ Available when the Power Switch is set to “
” or “ ” and
no cassette is in the camcorder.
Ⅲ Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for
more than 1 minute after that, the demonstration will resume.
Ⅲ “DEMO MODE” remains “ON” even if the camcorder power
is turned off.
Ⅲ To cancel Automatic Demonstration:
1. Set the Power Switch to “
” while pressing down the Lock
Button located on the switch and press the MENU wheel.
The Menu Screen appears.
2. Rotate the MENU wheel to select “
SYSTEM” and press
it. The SYSTEM Menu appears.
3. Rotate the MENU wheel to select “DEMO MODE” and
press it. The Sub Menu appears.
4. Rotate the MENU wheel to select “OFF” and press it.
5. Rotate the MENU wheel to select “
1
RETURN”, and press it
twice.
The normal screen appears.
How To Attach The Lens Hood
The provided lens hood helps block out glare when shooting under bright sunlight, the same way professional
photographers do.
MODEDEMO –
ON
OFF
MENU Wheel
Sub Menu
Align the lens hood with the
camcorder’s lens and screw
it in clockwise.
Threading