Filter
Top Products
Cintel International Ltd. diTTo User Guide
Issue 3 27
35mm Keykode Reader (Optional)
For safety information about this option refer to Appendix 3
diTTo can be supplied fitted with a Keykode reader, mounted to the left of the film gate. The reader can be adjusted to
accommodate keykode on either side of the film.
To adjust, refer to Fig 44.
1. Loosen the locking screw.
2. Move the keykode reader in or out as required.
It is best to run the transport with film containing
the appropriate keycode position while adjusting
the position to ensure corrct readings are being
obtained, by looking at he keykode box on the
GUI.
3. Tighten the locking screw.
• For Original Camera Negative (OCN). Position A
• For Interpositive (IP) keycode. Position A
• For OCN keycode printed on IP. position B**
• For OCN Keykode printed via an IP to an
Internegative. Position A
** This is only available if the lab has printed the OCN
keykode correctly on the Interpositive. Fig 46 Optional Keykode Reader