Cintel International Ltd. diTTo User Guide
Issue 3 3
Declarations of Compliance
CE Declaration of Conformity Compliance To Be Advised
FCC Part 15 Class A Declaration of Conformity Compliance To Be Advised
Information for Users on Disposal of Old Equipment
European Union]
This symbol indicates that the electrical and electronic equipment should not be
disposed as general household waste at its end-of-life. Instead, the product
should be handed over to the appliance collection point for the recycling of
electrical and electronic equipment for proper treatment, recovery and recycling
in accordance with your national legislation.
By disposing of this product correctly, you will help to conserve natural
resources and will help prevent potential negative effects on the environment
and human health which could otherwise be caused by inappropriate waste
handling of this product. For more information about collection point and
recycling of this product, please contact your local municipal office, your
household waste disposal service or Cintel International, or your agent of Cintel
International.
Attention
Penalties may be applicable for incorrect disposal of this waste, in accordance
This symbol is only with national legislation.
valid in the
European Union (Business Users)
If you wish to dispose of this product, please contact service@cintel.co.uk to
obtain information about returning the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the treatment of
old electrical and electronic equipment.
Warning
Electrical supplies in excess of 50 (fifty) volts are potentially hazardous or lethal; supplies of up to 264V exist within
the diTTo Scanner. THE SCANNER MUST ONLY BE OPERATED WITH ALL COVERS IN PLACE; covers must
only be removed by qualified service personnel for maintenance purposes.
The scanner is designed so that it CANNOT be operated remotely with the film transport door open; safety
interlock switches force the scanner into a STOP condition when the door is opened. Do NOT in any way over-ride,
modify or alter the operation of these switches; these switches are fitted for safety purposes and can only be over-
ridden by a qualified engineer equipped with the correct service tool. In the event of an interlock being overridden
the operator waivers ALL liability.
Ensure that film tension is switched OFF (Film on film path is slack) BEFORE touching any part of the film
transport mechanism.