Filter
Top Products
Serial Data Collection and Global Positioning System
April 28, 2004 15-5
Using the GPS Feature
1. Connect the appropriate end of the GPS serial cable to the Remote
Release Accessory port on your camera.
2. Connect the other end of the cable to the GPS unit.
3. On the GPS unit, set the output format to NMEA.
4. On the GPS unit, check the baud rate.
5. On the camera, set the baud rate to that shown on the GPS unit.
6. Choose GPS from the Tools menu.
7. GPS information appears. Press the OK button.
GPS information is written to the header of images captured while the
GPS unit is connected.