Filter
Top Products
5-10 April 28, 2004
Configuring your Camera
Using Job Tracker
You can enter International Press Telecommunication Council (IPTC) data
on your computer using KODAK PROFESSIONAL DCS Photo Desk Software,
then load the data into camera memory where it can be included in image
headers. The data follows the IPTC standard. job tracker files have a .IPT
extension.
1. Choose Job Tracker from the Tools menu, then choose one of the
following:
None—No job tracker data is written to the image headers.
<job tracker file>—Choosing this option writes the job tracker
data from the active file to the header of subsequently captured
images. This file must have been previously loaded. If no file has been
loaded, this option does not appear in the menu.
Load—There can be one active job tracker file at a time. This file can
be loaded from a memory card or from camera memory.
2. Press the OK button.
Saving a Job Tracker File
to a Card
You create and save job tracker files on the computer. Do the following to
save a job tracker file to a card so that it can be loaded in your camera:
On the computer:
1. Place a CF card in the computer’s card reader.
2. Using KODAK PROFESSIONAL DCS Photo Desk Software, save the .IPT
file to the card.
Alternatively, you can save the file to your hard drive and copy it to a
card later.