Filter
Top Products
Troubleshooting
April 28, 2004 C-3
Card Busy LED and Card icon on
the Digital Status LCD are
blinking.
Data is being written to the
memory card.
Do not remove the card until the blinking stops.
Accidentally deleted an image. Use the Recover function (see page 6-7) to
recover all images that have not been
overwritten.
Can’t recover deleted images. Copy any images on the card to your computer,
do a quick format (see page 6-6), then use the
Recover function (see page 6-7). If the images
have not previously been overwritten, it may be
possible to recover them.
Color is not right. Change the white balance setting to match the
current lighting (see page 7-2). Consider
capturing an image of a gray card and using
Click Balance (see page 7-3).
Images have low contrast. Use the histogram (see page 11-3) to see if you
are using the full dynamic range. Consider
changing ISO (see page 5-22) or using flash.
Some subject matter is out of
focus.
Consider changing depth of field (see
page 2-21), or increasing the f-number.
Images are blurry. The Focus Mode switch on the
lens is set to M.
Set the Focus Mode switch on the lens to AF
(see page 8-1).
Hand movement or camera
shake occurred when the
Shutter button was pressed.
Press the Shutter button more gently or use the
Remote Controller or a tripod.
Images in the viewfinder look
blurry.
Adjust the Viewfinder Diopter (see page 2-20).
The wrong language appears on
camera screens.
Select the correct language (see page 5-12).
Incorrect date and time appears Date and time setting may be
incorrect.
Enter the correct time and date (see
page 5-17).
Problem Cause Remedy