Filter
Top Products
4-4 April 28, 2004
The Basics
Setting ISO ISO determines the sensitivity of the camera’s imager to light. Increasing or
decreasing the ISO increases or decreases sensitivity.
The ISO range is 160 - 1600 (Raw files), or 160 - 800 (JPEG files). See
page 6-4.
You can change the ISO setting in 1/3 stop increments.
1. Choose ISO from the Basic menu then highlight the desired setting.
2. Press the OK button.
Shortcut:
• You can also access this function using the Digital Status button
and the Digital Status LCD.
NOTE: You can also set ISO using camera controls (see page 5-22).