Filter
Top Products
9
• If the camera is left switched on for a set time without any buttons or switches operated, the auto
power-off function will be activated and the camera will turn off automatically. The set time until the
camera turns off is 3 minutes. This time cannot be changed.
• Do not touch contacts with fingers since the battery life may decrease due to bad contact if oil or
grease is deposited on the battery cover or metal parts within the battery compartment. If a contact is
accidentally touched or battery life decreases, wipe with a soft, dry cloth before use.
• When using rechargeable batteries, read the instructions provided with and on the batteries and use
in accordance with the instructions.
• Do not use rechargeable batteries with substantially different charge status.
• Remove the batteries when the camera is not going to be used for an extended period.
Warning
When you continue using the camera for a long time, the batteries become hot. Contact with the batteries
can lead to burns.
Attaching the Strap
1 Pass the thin loop of the strap through the strap
holder on the left side of the camera.
2 Pass the other strap end through the thin loop and
pull.
Warning
When using the camera with the strap attached, take care so that the
strap does not wrap around the neck. On no account hang the camera
on the neck of small children or infants. Strangulation may result if the
strap is wrapped around the neck.
Turning the Power ON and OFF
Turning the power ON
Open the lens cover.
The power turns ON, the LCD monitor lights up, and the through-image
(the image as seen through the lens) is displayed.
Turning the power OFF
Close the lens cover.
The power turns OFF, and the LCD monitor turns off.
Setting the Display Language, Date and Time
When using the camera for the first time following purchase, set the display language, data and time as
described in the following.
For how to make the setting, see “Setting the Display Language, Date and Time” in the Quick Guide or
[Adjusting the Date and Time] (p.16) or [Changing the Display Language] (P.18) in this manual.
1
2